Nauticam has announced the NA-R7 housing for the Canon EOS R7 camera. It uses the N100 port system and offers compatibility for both native R mount and EF mount with adaptor lenses. Strobe triggering is via optional manual or TTL electro-optical conversion boards.

The NA-R7 is shipping now, priced at $3,377.

From Nauticam

NA-R7

NA-R7 Housing for Canon EOS R7 Camera

FOR CANON EOS R7 CAMERA
SKU # 17338

$3,377.00

The latest Canon APS-C mirrorless camera is finally here! The Canon EOS R7 utilizes Canon’s newest RF mount and boasts a 32.5MP CMOS sensor. Crop-sensor cameras have always been popular with the underwater shooter community and with good reason. Lens choices, size, and weight are just a few of the great features that shooting APS-C cameras has. The EOS R7 gives original Canon 7D and 7D Mark II shooters a great reason to upgrade and Nauticam is ready to help with the NA-R7 housing.

TECHNICAL SPECIFICATIONS:

Dimensions: 323mm x 173mm x 138mm (W x H x D)
Depth Rating: 100m
Weight in air: 2.3kg
Weight in water: negative 0.1kg (includes camera and battery)
Port Opening: N100

INTRODUCING NA-R7

THE CANON EOS R7 CAMERA

The Canon EOS R7 is the latest in Canon’s APS-C mirrorless camera lineup which has gained unprecedented demand. It features the RF lens mount which has the same large 54mm diameter but the ability to have larger rear lens elements that are closer to the sensor gives increased corner and outer edge sharpness.

The R7 uses a 32.5MP CMOS sensor with in-body image stabilization which can reduce shake by up to 7 stops. The camera’s Dual Pixel II autofocus system was carried over from the pro body EOS R3 and features 651 automatic AF points covering the entire sensor area. It is also capable of recording oversampled 4K 30p video using the full 7K area of the sensor, or subsampled UHD 4K up to 60p from the full sensor width.

The EOS R7 can also use the large EF-mount lens lineup via a simple EF to EOS R adaptor. The Nauticam NA-R7 housing only supports the the standard EF to EOS R adaptor and does give access to the control ring or drop in filter adaptors.

Key Camera Specifications

32.5MP APS-C CMOS sensor with Dual Pixel AF
Up to 30 fps shooting (e-shutter), 15 fps with mechanical
In-body image stabilization, rated at up to 7 stops
Oversampled UHD 4K up to 30p, line-skipped or cropped 4K/60p
10-bit video as ‘PQ’ true HDR footage or C-Log
2.36M dot OLED viewfinder
1.62M dot fully-articulating touchscreen
Twin UHS-II SD card slot
Environmental sealing

THE NAUTICAM NA-R7 UNDERWATER HOUSING FOR THE CANON EOS R5 CAMERA

The NA-R7 underwater housing follows suit with Nauticam’s drive for innovation. Like the full frame Canon EOS R5, R5 C and R3, the NA-R7 present shooters with the ability to use both the available legacy EF lenses via an adapter in addition to their native RF optics. To support both the legacy and native lenses, Nauticam has designed a N100 to N120 adapter which integrates into the N120 Canon EF port system. Canon’s EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS R7 inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. As the RF-S lens lineup emerges, dedicated port and extension ring combinations will be listed on the new N100 RF-S Port Chart.

Mission Control

Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R7 where a dual thumb lever is placed by the right front side accessing the M-Fn and Record buttons.

On the rear right side is a thumb lever accessing AF-ON. Near the left handle is a thumb lever for “Playback.”

Large knurled and rubberized control dials access the camera’s “main” and “sub” command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for “Menu”, “Focus Point Selection” and others are also easily reached from the handles.

Flash Triggering

Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (PN 26305) or a TTL Flash Trigger (PN 26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes. For controlling strobes that do not support fiber optic flash triggering, a variety of legacy hot-shoe flash control bulkheads are available.

INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM

The Nauticam vacuum check and leak detection electronics are shipped with the NA-R7 as standard equipment. Combined with an accessory vacuum valve (25624) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

RESOURCES

Support and Downloads

Product Manual Coming Soon

WHAT’S IN THE BOX:

NA-R7 Housing
90137 Spare main o-ring, lubricant and removal tool
2x Plugs for fiber optic mount
2x Handles with mounting balls
Set of allen keys
CR2032 battery for leak detector
Padded housing bag and shoulder strap

Optional Accessories:

25624 M14 Vacuum Valve II (Pushbutton Release)

32211 Nauticam Full Frame Straight Viewfinder 32°/ 1:1

32213 Nauticam Full Frame Angle Viewinder 32°/ 1:1

32201 Nauticam 180˚ straight viewfinder

32203 Nauticam 45˚ viewfinder

26305 Manual Flash Trigger for Panasonic/FujiFilm/Canon

26321 TTL Flash Trigger for Canon

26216 Universal Optical Fiber Cable

25081 M24-M16 Step Down Adaptor

25020 M14 Nikonos 5-pin bulkhead with Canon hotshoe connection
25017 M14 6 pin bulkhead for Canon system
25022 Canon Hotshoe Plug to M14 Ikelite Style Bulkhead ~X and Ground Connection Only

Mounting Accessories:

25221 M10 strobe mounting ball for housing

25224 M10 strobe mounting ball for housing (with hole for using with lanyard)

17959 Housing Mounting ball with 1/4” screws

25218 Mounting Ball Set for Tripod (for NA-A7RIII/BMPCC/XT3/RIV/Z50/R7)

17960 Universal Quadra-Pod Plate for Nauticam Housings

HDMI Recommended Configurations

For HDMI 2.0 Cable System

25086 M24 adaptor for HDMI 2.0 Cable

25077 M24D1R205-M28A1R170 HDMI 2.0 Cable (for NA-XT3/R5 to use with Ninja V housing)

17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (excl. HDMI 2.0 cable)

17922S Nauticam Atomos Ninja V-S Housing for Atomos Ninja V and Ninja V+ 5” Recorder/Monitor/Player (excl. HDMI 2.0 cable) with Atomos AtomX SDI Module

For HDMI 1.4 Cable System

25033 Standard HDMI Cable with M16 Thread

25081 M24-M16 Step Down Adaptor

25076 HDMI (D-D) Cable in 200mm Length for NA-XT2/NA-XH1/NA_A6400

17925 NA-503-H Housing for SmallHD 503 UltraBright On-Camera Monitor (With HDMI 1.4 input)

17923 NA-Shinobi-H Housing for Atomos Shinobi 5.2” 4K HDMI Monitor with

Tagged: eos r7, na-r7, nauticam

Read More Wetpixel.com